Midea MLTW44A4BWW Manual Del Usuario E Instrucciones De Instalación página 43

Description Reason
E1
After water finishes enter
your washer, the water
level has not changed in
10 mins.
E2
The unit takes more than
10 minutes to drain.
E3
The lid is open. The
washer is not level.
E4
Your washer is out of
balance more than three
times in spin operation.
E5
Your washer is not level.
Impact switch failed.
F2
The EEPROM failed
F5
Load sensing failed.
F8
Water level sensor failed.
Fd
Lid lock failed.
C9
The PCB failed.
CL
The lid has been open
for over 20 seconds with
the Control Lock function
activated.
Solutions
•
Make sure that the lid is
not open.
•
Make sure that water
is not leaking. See No
water or not enough
water on page 40.
•
See Washer does not
drain or spin on page 41.
•
Close the lid.
•
Level the washer see
Level your washer on
page 23.
•
Relevel the load, if can not
solve, Contact Midea service
center.
•
Adjust the washer level
refer to installation.
•
If the situation continues
call Midea service center.
•
Contact Midea service
center.
•
Contact Midea service
center.
•
Contact Midea service
center.
•
Contact Midea service
center.
•
Contact Midea service
center.
•
Press the Power button
•
function see Setting the
Control Lock on page 33.
•
Contact Midea service
center.
43