Mounting Steps - Lenze L-force 9400 82 200 A Serie Instrucciones Para El Montaje

3.3

Mounting steps

Proceed as follows for the installation:
1. Prepare M5 threaded holes on the mounting plate, for instance according
to the mounting grid.
–
Always use all mounting points specified.
2. Screw the filter onto the mounting plate.
–
Use M5 screw and washer assemblies or M5 hexagon socket screws
with washers.
–
If further devices are to be mounted directly adjacent on the right-hand
side of the filter, do not tighten the screws fully before all devices are
mounted and aligned.
–
Tightening torque: 3.4 Nm (30 lb-in).
EDK94AZRP45 DE/EN/FR/ES/IT 2.0
Mechanical installation

Mounting steps
3
33