asalvo DICKENS 20437 Manual De Instrucciones página 25

HEIGHT ADJUSTMENT FOR HEADREST AND HARNESS
According to the height of
the child, adjust the height of
the headrest to control the
height of the seat belt, so as
to avoid the headrest being
too high or too low to cause
the safety belt to strangle the
child's neck manufacturer.
HOW TO DETACH THE COVER OF CAR SEAT
Press adjustment button on
the front of the seat and pull
the shoulder belt forward
with the other hand to make
the seat belt loose.
If the car seat belt buckle
is too long to fix the car
child restraint system
well, this is dangerous. If
you have any questions,
it is recommended to
contact the car child
restraint system.
Open the buckle: press the red
button on the safety lock.
Detach the cover,
and remove
the cover in the
direction of the
arrow. Remove
the buckle, and
then remove the
seat belt.
Note: Do not use any other stress points/
installation points other than those indicated.
Note: If you have any questions about the
stress point during installation and use,
it is recommended to contact the manufacturer
of the child restraint system.
Detach the infant cushion
and hide the buckle.
INSTRUCTIONS
Remove shoulder pad.
EN
25