Brandt BFV 1508 Manual De Instrucciones página 13

If you haüe not interrupted the washing
cycle by selecting 'rinse hold', the pro-
gramme sequence indicator will move on
to the pump setting when the rinse cycle
is finished.
The programme sequence indicator will
the special programme 'pump' on the
programme selector switch.
Spin @
During the final spin phase the pro-
gramme sequence indicator passes
through this section. The duration of the
spin cycle depends on which programme
has been selected and on the spin speed.
If the washing machine does not spin,
celled by the Automatic Spin Correction
System (ASC).
In that case, the laundry in the washing
machine has caused sufficient imbalance
for the machine to abandon the spin at-
tempts, because the stability of the
machine might otherwise be at risk. The
programme sequence indicator will move
to this position if you have selected 'spin'
or 'short spin'.
The washing programme has been com-
soon as the door indicator light goes out,
the door will be unlocked automatically
and the laundry can then be removed.
The washing machine can be switched off
by turning the programme selector switch
machine is switched on will then also go
Out.
Tips for caring for your laun-
dry and the environment
You can contribute to the protection of
the environment by bearing the following
advice in mind:
• Wash the maximum load (see pro-
• Save energy by washing at reduced
temperatures and using the eneigy
saving button with the cottons and
easy-care programmes.
• Where appropriate, wash particulary
heavily soiled laundry separately.
• Use less washing detergent for smaller
loads and laundry which is only lightly
soiled and select the quick wash.
• Only use automatic washing detergent
for white cottons or heavily soiled tex-
tiles at 60 - 90°C.
14