Publicidad
Idiomas disponibles
Idiomas disponibles
3
Select the input of the system
connected to the component you want
to watch (BD, DVD, SAT), and switch
the HDMI input of the TV, so that an
image from the connected component
is displayed.
4
Set the Control for HDMI function
of the
TV to on.
The Control lkw HDMI ['nuction t\w the
system and the connected
component
is
simultaneously
set to oi1.
During the setting, "SCANNING"
appears
in the flout panel display. After you finish
the setting, "COMPLETE"
appears in the
l?ont panel display. Wait until the setting is
complete.
If "SCANNING"
or "COMPLETE"
does
not
appear
after
performing
the
steps
above
Set the Control for HDMI lhnction
to on for the
system and the connected
component
individually.
1
Press AMP MENU.
2
3
4
5
6
7
Press 4,/'1' repeatedly until "SET HDMI"
appears, then press _
or ..).
Press 4,/'1 _ repeatedly until "CTRL:
HDMI" appears, then press _
or -).
Press 4,/'1 _ to select "ON."
Press AMP MENU.
The AMP menu turns o11. The Control for
HDMI hmction is set to o11.
Set the Control for HDMI function
of the
connected component
to on.
For details on setting the connected
component,
refer to its operating
instructions.
Select the input of the system
connected to the component you want
to use the Control for HDMI function
for
(BD, DVD, SAT), and repeat step 6.
If you
add
or reconnect
the
component
Per_trm
steps of "Preparing
_tr the "BRAV1A"
Sync" and "If"SCANNING"
or "COMPLETE"
does not appear after performing
the steps
above" again.
• During the setting of the Control fi_r HDMI flmction
fi)r the system, the System Audio Control function
does not work
• If the Control lk>rHDMI filnction lk)rthe connected
component cannot be set simultaneously by setting
"CONTROL FOR HDMI" of the TV, set the Control
fi_rHDMI function using the menu of the connected
component.
• For details on setting the TV and Ihe connected
components, refer to their operating instructions.
r_
•The defauh setting of the Control fi_r HDMI function
of the system is "OFF."
22us
Publicidad
