Publicidad
Idiomas disponibles
Idiomas disponibles
Using the Volume
Limit
function
When tile System Audio Control
hmction is
active, and the output method changes
from the
TV speaker Io the syslem speaker automatically,
loud sound may be
oulpul
depending
on tile
volmne level of the system. You call prevent this
by limiting the maxinmnl
vokune
level.
1
Press AMP MENU.
2
Press,I,/'l'
repeatedly until "SET HDMI"
appears, then press _
or ..).
3
Press,I,/'l" repeatedly until "VOL LIMIT"
then press (_) or -.).
appears,
4
Press ,I,/,I, to select the maximum
volume level you want.
The maxinnml
volume level changes as
lk)llows:
MAX *--+49 *--+ 48.....2 *--+ 1 *--+ MIN
_ll
Press AMP MENU.
The AMP menu turns oil.
Using the input buttons
of the
remote
The input buttons (TV (white), BD, DVD, SAT)
work as lollows
when the Control lot HDMI
fimction is set to on.
• BD, DVD, SAT: Since tile input of the TV is
also switched automatically,
you can watch tile
image of the selected component
on tile TV
simply by pressing
tile buttons.
• TV: Tile input of the TV switches
automatically.
When you connect a Sony TV,
you call watch the TV simply by pressing the
buttons.
•You can control connected Sony components by
pressing the input buttons. For details, relier to
"Controllingthe connected Sony components _ith the
remote" (page 27).
d
if)
o
"N
@
e-
{n
•This flmction
is available
only when the Control
lbr
HDMI fimction
is set to on.
• This function is not available
when the output method
changes
from the system
speaker to the TV speaker.
• We
recommend
that
you
set the
maximum
volume
level to a little lower than the volume you usually
listen to.
•Regardless of the maximum volume level you seL the
VOLUME +_ button of the system and the MASTER
VOL+/
button of the remote ire operable.
• If you do not want to limit Ihe maximum volume
level, select "MAX."
25us
Publicidad
