Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY STEPS
STEP 7: Grill Head to Cart
NOTE: This step requires two people to lift and position grill head onto cart.
1, Remove the tie wraps securing regulator hose to underside
of grill head, Pull hose and igniter
wire out to side of grill head,
2, Carefully lower the grill head onto the cart, Open lid and attach head to cart with four (4)
M6 x 13 screws and M6 compression
washers.
3, Attach warming basket bracket to the back firebox with four (4) M4 x 10 screws and four (4)
M4 compression
washers as shown in Fig, 7b,
Fig. 7a
Fig. 7b
18
Publicidad
