Hamilton Beach OG02 Manual De Montaje Y Operacion página 22

ASSEMBLY STEPS
STEP 11: Side Burner
1. Unscrew and remove two front screws holding side burner in place as shown in Fig. 11a.
2. Loosen side burner in side shelf and take it out from the top of side burner hole as shown in
Fig. 11b.
Fig. 1 la Fig. 1 lb
3. Putl the side burner valve with knob through the hole in the right-side panel as shown in
Fig. 11c and remove the packing material as shown in Fig. 11d.
Fig. 11c Fig. 11d
4. Remove knob from side burner valve. To remove, pull knob straight out from valve stem as
shown in Fig. 11d.
5. Unscrew the two screws at side of valve stem as shown in Fig. 11e and Fig. 11f. Take care
not to remove the other two screws, or the valve will come apart.
22
Fig. 11e Fig. 1If