Hamilton Beach OG02 Manual De Montaje Y Operacion página 26

ASSEMBLY STEPS
STEP 13: Grease Cup
1. Take out the grease accumulate panel from the firebox, making sure the convex face is down
and the drip cup hole is on left side of grease accumulate panel (when viewed from the rear)
to ensure it will hold grease, and put it back as shown in Fig. 13a.
2. Place grease cup into grease cup clip and hang grease cup clip from bottom of firebox as
shown in Fig. 13b.
//
\ /
Fig. 13a
/ \
/ \
i
\
\
\
28 Fig. 13b