Publicidad
Idiomas disponibles
Idiomas disponibles
5 Charging
EN
• Fully charge the product before first use and when the
• When the battery power is low, the product emits
• The product cannot be used during charging.
• If the product is to be stored for an extended period,
1. Plug the smaller end of the USB cable
port
9
2. Plug the larger end of the USB cable into the USB port of a
compatible USB power source (e.g. USB power adaptor).
3. Plug the USB power adaptor into a mains socket for charging.
Charging starts automatically. The cleansing button ( )
flashes white during charging and stays lit when charging is done.
4. When charging is done, unplug the USB power adaptor from
the mains socket and disconnect the USB cable from the
charging port of the product.
6 Facial cleansing
WARNING! RISK OF INJURY!
• Do not use the facial brush for more than
2 minutes per cleansing session and more
than 2 times per day.
6.1 Tips on facial cleansing
• Clean the facial brush
chapter "Cleaning".
• Before cleansing an area of the face for the first time, perform
a skin sensitivity test on a spot. Start your cleansing session
only if there is no adverse reaction.
• The facial brush is equipped with 2 operation modes: vibrating
mode and pulsating mode. The vibrating mode uses uniform
vibrations for deep, gentle cleansing. The pulsating mode uses
alternating strong and weak vibrations for a massage-like
soothing effect. There are also 7 speed settings for each mode.
11
battery power is low.
2 beep sounds and the cleansing button flashes 10 times
before switching off automatically. Recharge the product.
the battery level should be checked and the product
should be charged regularly.
of the product.
1
10
before first use as described in the
into the charging
3
Publicidad
