Silk’n BRIGHT LUX FAC03 Manual De Usuario página 16

• Do not use hot water for cleaning.
1. Clean the product with lukewarm water and soap.
2. Thoroughly rinse the product with water after cleaning and
wipe it dry with a dry cloth.
10 Storage
All parts must be completely dry before being stored.
• Store the product in a clean and dry place, avoiding heat and
direct sunlight.
• Store the product so that it is not accessible to children.
11 Troubleshooting
Some problems may be caused by minor faults that you can fix
yourself. To do so, follow the instructions in the following table.
If it is still not possible to resolve the problem, contact customer
service. Do not repair the product yourself.
Fault
The product
does not
operate.
The product
does not charge.
Possible cause and solution
• Make sure the product is properly
charged.
• Make sure the product is not connected
to a USB power source. The product does
not work while charging.
• Make sure the USB cable
connected to the charging port
the USB power source.
is securely
10
and
9
16
EN