Publicidad
Idiomas disponibles
Idiomas disponibles
English
LOADING STAPLES
WARNING
When loading staples into Stapler,
1) remove battery from the stapler;
2) do not pull trigger; and
3) do not depress push lever.
1. Lightly press the stop lever and gently pull out the
magazine cover.
Pull out
Stop lever
2. Set staple strip into the magazine and keep the end of
staple in contact with guide surface.
Staples strip
○ The staple shown in page 12 can be loaded onto the
guide surface of the magazine without any
adjustment.
Always keep the end of staple in contact with guide
surface.
18
Press
Magazine
Guide surface
Magazine
Guide surface
Staple
3. Slide the staple strip into the blade guide.
Blade guide
4. Confirm that staple strip is placed with guide surface
properly, then push the magazine cover forward to be
latched.
STAPLER OPERATION
Read section titled "SAFETY" (pages 2–9).
DANGER
Operators and others in work area MUST wear
safety glasses with side shields which conforms
to ANSI Z87.1 specifications.
WARNING
● NEVER point tool at yourself or others in work
area.
Magazine
Gap
Staple strip
Publicidad
