Publicidad
Idiomas disponibles
Idiomas disponibles
Derailleur Eye Gauge and Alignment Tool
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
The exact alignment of the rear derailleur eye is a prerequisite for reliable shifting. This eye can bend
if the bike falls on its right side, such as in accidents. The derailleur eyelet is often bent or misaligned,
even on new frames. This tool is a simple yet very accurate tool to check and correct derailleur
hanger alignment.
SAFETY INFORMATIONS
•
Keep children and other unauthorized persons out of the work area.
•
Do not allow children to play with the tool or its packaging
•
Do not use the tool if any parts are missing or damaged.
•
Only use the tool for its intended purpose.
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of discarding them as waste. Packaging must be
sorted, taken to a recycling center and disposed of in an environmentally friendly manner.
Check with your local waste authority for recycling policies. At the end of its useful life,
dispose of this product in an environmentally responsible manner.
COMPONENTS
1
Sliding lever
2
Measuring stick
3
Measuring stick holder
4
Sliding handle
5
Mounting axle with thread
6
O-Rings
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
for Bicycle Derailleur Gears
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 70070
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
