Publicidad
Idiomas disponibles
Idiomas disponibles
Gather the cord and wrap it loosely around
the upper and lower cord hooks.
Lock
power cord plug onto the power cord.
cleaner
in a dry, indoor
area,
on the floor with
the handle
locked
in the
upright position.
Electrical
Shock and Personal
injury
Hazard
Wrapping
the cord too tightly
puts stress
on the cord and can cause cord damage,
Review this table to find do-it-yourself
solutions
for minor performance
problems.
Any service
needed, other than
maintenance
described
in this Owner's
Manual, should
be performed
by a Sears
or other qualified
service agent.
Disconnect
electrical
supply
before
performing
maintenance
to
the
unit.
Failure
to
do
so could
result
in
electrical
shock
or
personal
injury.
Cleaner
won't
run
Cleaner
won't
pick
up or low suction
1,
2.
3.
4.
1.
2.
3.
4.
5.
6,
7.
8.
Dust escaping
1.
from
cleaner
2.
3.
4.
Cleaner
tools won't
1.
pick-up
2.
3.
Headlight
not
1.
working
2.
Cleaner
is difficult
1.
to push
2.
Performance
1.
indicator
light turns
red
2.
3.
Height
adjust
Won't
1.
function
2.
Power cord not firmly plugged
into outlet.
Blown fuse or tripped
breaker.
Thermal
Protector
activated.
Needs service.
Dirt container
not installed
correctly.
Dirt container
full.
Brushroll
worn.
Belt is broken, worn or slipped
out of position.
One or both filters clogged.
Carpet height setting
is
incorrect.
Hose clogged.
1.
2.
3.
4.
1.
2.
3.
4.
5.
6.
7.
Air directors
need to be cleaned.
8.
Dirt container
full.
1.
Dirt container
not installed
2.
correctly.
Hose not installed
correctly.
3.
One or both filters not installed
4.
completely.
Hose clogged.
1.
Dirt container
full.
2.
One or both filters clogged.
3.
Bulb burnt out.
1.
Loose electrical
wires.
2.
Carpet height setting
is
1.
incorrect.
Belt is broken, worn or slipped
2.
out of position.
Plug unit in firmly.
Check fuse or breaker in home. Replace
fuse/reset
breaker.
Allow cleaner
to cool - Pg. E.
Take to Sears Service
Center.
Review DIRT CONTAINER
REMOVAL
AND
REPLACEMENT-
Pg. 11,12.
Empty dirt container
- Pg. 11.
Replace
brushroll-
Pg. 13.
Replace
belt - Pg. 13.
Remove
filters and clean - Pg. 11,12.
Set carpet height
adjust
to appropriate
setting
for carpet being cleaned
- Pg. 9.
Check inlets, hose and dirt container
for
obstructions;
remove
obstruction
- Pg. 14.
If clog persists,
call 1-877-839-2046.
Remove
air directors
and clean. Pg. 12.
Empty dirt container
- Pg. 11.
Review
DIRT CONTAINER
REMOVAL
AND
REPLACEMENT-
Pg. 11,12.
Review
hose placement-
Pg. 6.
Review
filter removal
and replacement
-
Pg. 11, 12.
Check inlets, hose and dirt container
for
obstructions;
remove
obstruction
- Pg. 14.
If clog persists,
call 1-877-839-2046.
Empty dirt container
- Pg. 11.
Clean filters - Pg. 11, 12.
Replace
bulb - Pg. 14.
Take to Sears Service
Center.
Set carpet height
adjust
lever to appropriate
setting
for carpet being cleaned
- Pg. 9.
Replace
belt - Pg. 13.
Hose clogged.
1.
Check inlets, hose and dirt container
for
obstructions;
remove
obstruction
- Pg. 14.
If clog persists,
call 1-877-839-2046.
One or both filters clogged.
2.
Remove
filters and clean - Pg. 11,12..
Air directors
need to be cleaned.
3.
Remove
air directors
and clean. Pg. 12.
Internal
breaker
tripped.
1.
Turn the unit off and then on to reset internal breaker.
Needs service.
2.
Take to Sears Service
Center.
For any
questions,
please
call
1-877-839-2046.
15
Publicidad
