Descargar Imprimir esta página

MSW Motor Technics MSW-HS-T1000 Manual De Instrucciones página 3

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

DE
k)
Es ist untersagt, in den Aufbau des Geräts
einzugreifen, um seine Parameter oder Konstruktion
zu ändern.
l)
Überlasten Sie das Gerät nicht.
m)
Lange Werkstücke müssen für die Bearbeitung
abgestützt und stabil sein.
n)
Während der Arbeit die Messer nicht anfassen.
o)
Während dem Halten des Werkstücks die Hände
nicht näher als 20 cm von den Messern des Geräts
halten.
p)
Prüfen Sie die Schrauben regelmäßig und ziehen Sie
sie bei Bedarf nach.
q)
Schmieren Sie alle rotierenden Teile, Führungen und
Gleitstücke regelmäßig mit Öl oder Fett ein
r)
Denken Sie daran, jedes Stück beim Schneiden sicher
zu halten/zu sichern.
ACHTUNG! Obwohl das Gerät mit dem Gedanken
an
die
Sicherheit
entworfen
wurde,
besitzt
es bestimmte Schutzmechanismen. Trotz der
Verwendung
zusätzlicher
Sicherheitselemente
besteht bei der Bedienung immer noch ein
Verletzungsrisiko. Es wird empfohlen, bei der
Nutzung Vorsicht und Vernunft walten zu lassen.
4
U S E R M A N U A L
LEGEND
Read instructions before use.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Wear protective goggles.
Wear protective gloves.
ATTENTION! Hand crush hazard!
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in serious injury or even death.
The terms "device" or "product" are used in the warnings
and instructions to refer to GUILLOTINE SHEAR.
SAFETY IN THE WORKPLACE
a)
Make sure the workplace is clean and well lit. A messy
or poorly lit workplace may lead to accidents. Try
to think ahead, observe what is going on and use
common sense when working with the device.
b)
If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
c)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
d)
Children or unauthorised persons are forbidden to
enter a work station. (A distraction may result in loss
of control over the device).
e)
Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
f)
Keep packaging elements and small assembly parts
in a place not available to children.
g)
Keep the device away from children and animals.
h)
If this device is used together with another
equipment, the remaining instructions for use shall
also be followed.
REMEMBER! When using the device, protect
children and other bystanders.
PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The machine may be operated by physically fit
persons who are able to handle the machine, are
properly trained, who have reviewed this operating
manual and have received training in occupational
health and safety.
c)
The device can be handled only by physically fit
persons who are capable of handling it, properly
trained, familiar with this manual and trained within
the scope of occupational health and safety.
d)
When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
e)
Use personal protective equipment as required
for working with the device, specified in section 1
(Legend). The use of correct and approved personal
protective equipment reduces the risk of injury.
Rev. 07.09.2021
Rev. 07.09.2021
EN
f)
Do not overestimate your abilities. When using the
device, keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
g)
Do not wear loose clothing or jewellery. Keep hair,
clothes and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught in
moving parts.
h)
The device is not a toy. Children must be supervised to
ensure that they do not play with the device.
i)
The material to be worked should be free of impurities.
j)
Do not touch any movable parts or accessories during
device operation.
SAFE DEVICE USE
a)
Do not overload the device. Use the appropriate tools
for the given task. A correctly-selected device will
perform the task for which it was designed better and
in a safer manner.
b)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
c)
Keep the device in perfect technical condition. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of the
device. If damage is discovered, hand over the device
for repair before use.
d)
Keep the device out of the reach of children.
e)
Device repair or maintenance should be carried out by
qualified persons, only using original spare parts. This
will ensure safe use.
f)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
g)
When transporting and handling the device between
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country where
the device will be used.
h)
Clean the device regularly to prevent stubborn grime
from accumulating.
i)
Do not work on two workpieces at the same time.
j)
The device is not a toy. Cleaning and maintenance may
not be carried out by children without supervision by
an adult person.
k)
It is forbidden to interfere with the structure of the
device in order to change its parameters or construction.
l)
Do not overload the device.
m)
Long workpieces must be supported and set stably for
working.
n)
Do not touch the cutters during device operation.
o)
Do not bring your hand closer than 20 cm to the
device cutters when holding the workpiece.
p)
Check bolts regularly and retighten if necessary.
q)
Regularly lubricate all rotating parts, guides, sliding
parts with oil or grease.
r)
Be sure to hold/secure each piece securely while
cutting.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
5

Publicidad

loading

Este manual también es adecuado para:

Msw-hs-t1250