Descargar Imprimir esta página

ANSMANN 1001-0143 Manual De Operación página 18

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 29
4. Clean the terminals with a solution of water and baking powder to protect them
from corrosion.
5. Examine the cables regularly for cracks or other damages and have them replaced
if applicable.
circle-c NOTE
Always make sure that the charger is disconnected from the mains before you carry
out maintenance and cleaning work.
triangle WARNING:
All other maintenance work should only be carried out by qualified personnel.
8. TROUBLESHOOTING
Fault display
LED
Battery is not charg-
ing
LED
Battery voltage below
flashes
3.5V / above 15V
Battery is not charg-
ing
9. ENVIRONMENTAL INSTRUCTIONS AND DISPOSAL INFORMATION
Do not dispose of electrical appliances via the household waste.
Dispose of the charger, incl. accessories and packaging, in an environmentally
friendly manner. Do not throw the vehicle battery charger into the household
waste, fire or water. Chargers that are no longer functional should be recycled if
possible. Ask your local dealer for assistance.
Dispose of batteries at collection points provided for this. As an end consumer,
you are obliged by law to do this (German Battery Ordinance). Batteries contain-
ing pollutants are marked with symbols that advise you of the prohibition on
disposing of batteries via the household waste. The names of the crucial heavy
metal are: Cd = cadmium, Hg = mercury, Pb = lead.
Transport consumed batteries to a disposal facility in your town or municipality or
back to the dealer. By doing so, you are fulfilling your legal obligations and making
an important contribution to the protection of the environment.
18
Situation
Terminals connected
to the battery with
the wrong polarity
Battery voltage does
not match the select-
ed charging mode
Battery is not suitable
for charging / battery
is defective
Battery is defective
Short circuit between
charger terminals
DE |
EN
| FR | ES | PT | SE | IT | NL | DK | FI | NO | PL
Possible problem
Solution
Connect terminal
correctly
Select the correct
charging program
Check suitability of
battery / replace
battery
Replace battery
Ensure that the ter-
minals do not come
into contact with
each other

Publicidad

loading