BRAND Transferpette-8 Instrucciones De Manejo página 49

What to do
6.
Discharge liquid
7.
Start blow-out?
Start blow-out manually
The blow-out function can, if necessary, be initiated manually
at any time.
1.
Bring up the
blow-out function
2.
Start blow-out
Note:
To accomplish the blow-out, the pistons move to the lowest position.
The user must be certain that any residual liquid is discharged safely.
If the pipetting key is pressed and held, the pistons will be maintained
at their lowest position to avert an accidental aspiration of liquid.
When the key is released, the pistons return to the start position
How to do it
Press the pipetting key once
to discharge the liquid. The
arrow in the display points
downwards (discharge).
No action required!
When pipetting in the PIP
mode the blow-out function
is performed automati-
cally.
Press the ENTER key. The
display shows ‚blo'
for blow-out.
Press the pipetting key
once to initiate the blow-out
process. The display moves
back to the start position of
the selected pipetting mode.
Keys to press Display readout
1x
1x
1x
PIP Mode
49