Descargar Imprimir esta página

Kärcher T 250 T-Racer Manual Del Usuario página 6

Publicidad

Idiomas disponibles

Idiomas disponibles

Cleaning vertical surfaces
Connect the T-Racer and the lower
wand with the trigger gun.
Illustration
Connect lower wand with T-Racer.
1 Press the bayonett connection into
the bayonet catch, then turn by 90°
until it locks into place.
2 Tighten the union nut.
Connect trigger gun with lower wand.
1 Press the bayonett connection into
the bayonet catch, then turn by 90°
until it locks into place.
2 Tighten the union nut.
Caution
Always hold the T-Racer at the hand
grip while cleaning the walls.
Do not reach under the edge of the
T-Racer while the device is in opera-
tion.
6 English
Troubleshooting
Pressure washer does not build up
the pressure or is vibrating.
Dismantle the nozzles, check the
nozzles for damage, rinse the T-Rac-
er with clean water then reinstall the
nozzles.
General notes
You can use the upper wand with any
other Kärcher accessory.
Maintenance and care
Maintenance
The unit is maintenance-free.
Care
Use a moist cloth and clean the appli-
ance after use.
Customer Support
USA and Canada
In the U.S. or Canada, please call
1-800-537-4129 for warranty issues and
visit www.karcher-help.com for techni-
cal support and product assistance.
Customer Support Mexico
Call: 01-800-024-13-13 for help or visit
our website: www.karcher.com.mx
Tip

Publicidad

loading