Publicidad
Idiomas disponibles
Idiomas disponibles
English
Operation
The REMSTIM 3000 always starts with the last settings used. Three downward running yellow light dots
signal the start of the 30-second application. Three yellow light points running upwards signal the end of an
application.
Switch on:
The REMSTIM 3000 is started by pressing the left key. It stops automatically after 30 seconds and can then
be restarted by pressing the left key again.
Note: The REMSTIM 3000 cannot be stopped during the 30-second application. To interrupt the stimulation
during the current application, put down the device or close your eyes.
Adjusting the deflection range of the eye movement:
The eye deflection level defines how far the eyes are alternately guided to the left and right side during an
application. The REMSTIM 3000 offers 4 deflection levels to choose from during application for optimal
comfort.
The deflection range of the eye movement is set by pressing the left key during operation. The 4 possible
deflection levels can be switched through by repeatedly pressing the left key. Two green light dots mark the
selected deflection range by flashing rapidly several times. Afterwards, a 30-second application automatically
starts again:
27
Publicidad
