Descargar Imprimir esta página

Num'axes PIE1061 Manual De Instrucciones página 28

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
Settings
Mode
PIR interval
Time Lapse setting
PIR sensitivity
Programmable options
(default settings in bold characters)
Photo | Video | Photo + Video | Time Lapse
− Photo: the camera will only shoot photos.
− Video: the camera will only shoot videos.
− Photo + Video: upon the same trigger event, the
camera will shoot photo(s) first then a video.
− Time Lapse: automatic photo capture at a pre-set time
interval (see "Time Lapse setting" parameter to set the
time interval).
Default PIR interval: 20 seconds
Programmable from 5 seconds to 59 minutes 59 seconds
This setting is disabled if the selected Mode is "Time
Lapse".
Press OK to set the desired time interval between
photos/videos upon motion detection by the PIR sensor.
Example: if the PIR interval is set to "01 min 00 sec", the
camera will wait 1 minute between photo/video
recordings with motion.
This parameter is enabled only if the selected Mode is
"Time Lapse".
Press OK to set the interval between automatic photo
captures.
H : M : S
00
00
30
Time Lapse programmable from 00:00:05 up to 23:59:59.
Example: if Time Lapse is set to 00:30:00, the camera will
automatically capture photos every 30 minutes.
The "Time Lapse" feature can work together with the
"Timer" feature.
High | Medium | Low
With the PIR sensitivity set to High, the PIR sensor:
is more sensitive to movements by smaller
subjects;
offers longer detection distance;
Guide PIE1061 – Juillet 2023 – ind. A - 28/112

Publicidad

loading

Este manual también es adecuado para:

Ngpiepho028