Num'axes PIE1061 Manual De Instrucciones página 32

Time format
Camera name
Time stamp
Temperature
Password
Beep Sound
Camera
Auto Power Off
LCD screen standby
Manually set date and time.
NOTE: it's important to set the date and time to ensure
some functions work as expected (for example: time
stamp on the photos, operation during a defined time
period).
12 hours | 24 hours
Default name: PIE1061
Press OK to modify the camera name for the camera
(digits/letters). Such function can help you identify from
where and from which camera the photos/videos are.
OFF | ON
Select "ON" if you want the date and time of the image
capture imprinted on every photo/video.
The temperature, moon phase, energy level of the solar
panel and camera name will also be imprinted on the
photos/videos.
Fahrenheit | Celsius
OFF | ON
Select "ON" then press OK to enable password protection
for your camera (4 characters).
OFF | ON
You can choose to hear a beep sound or not when you
press a button on the device.
OFF | 3 minutes | 5 minutes | 10 minutes
In SETUP mode, the camera will automatically power off
after 3, 5 or 10 minutes without any press on the keypad.
Slide the switch to the OFF position then back to the
SETUP position if you want to continue the settings.
If you select "OFF", there is no automatic shutdown of
the camera in SETUP mode.
OFF | 1 minute | 3 minutes | 5 minutes
In SETUP mode, the LCD screen will automatically go to
sleep after 1, 3 or 5 minutes of no activity. Press any key
to wake up the screen.
If you select "OFF", the screen does not go to sleep in
SETUP mode.
Guide PIE1061 – Juillet 2023 – ind. A - 32/112