Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
AND CARE
warm» button) (9), or while the water is heating. After the
water has reached the required temperature, it is needed to
press «keep warm» button (9) and ON/OFF button (7) again.
Switching off
The kettle switches off automatically when the water comes
to the boil or reaches the required temperature.
The kettle can be switched off at any time by pressing the on/
off button (7). The kettle switches off automatically when it is
removed from its base (6).
Pouring the water
Holding the kettle by its handle, lift it from its base (6). Check
the kettle remains upright while lifting it from its base (6).
Pour the water from the spout keeping the lid (1) closed.
Note: take care not to scald yourself while pouring the water.
Switching the kettle back on
If the kettle has been switched off manually, it can be
switched back on at any time.
Scale filter (2)
Scale, or calcium, is a natural substance that forms when
hard water is boiled. The filter (2) serves to retain the calcium
in the water kettle.
Cleaning and removal of the filter
It is important to clean the filter (2) regularly. The filter (2)
clips into the body and can be removed by pulling it upwards
from the body. It can be cleaned by gentle brushing with a
soft brush under running water.
Kettle clean and decale
Remove scale using either a proprietary de-scaling product
suitable for plastic kettles (following the instructions
carefully), or citric acid.
We recommend using citric acid as follows:
Boil 1 l/34 oz litre of water, then unplug the kettle and stand
it in an empty sink or bowl. Add 50 gm of citric acid crystals
gradually, then leave the kettle to stand.
9
Publicidad
