Publicidad
Idiomas disponibles
Idiomas disponibles
2.3.
Positioning the Product
Be Careful: Screws are not included.
To access the fixing areas, remove the front panel.
1.
Unscrew the 4 fastening screws.
2.
Position Aéromax Piscine in its location and mark the position of the holes.
3.
Lift the front panel from the bottom to the top.
4.
Drill the holes and put the fasteners in place.
Be careful, harness wire of HMI is fixed to the Front Panel
1-
Don't forget to clip the plugs to close the fixing areas. Theses plugs limit the risk of
mouse intrusion.
15
Publicidad
