Publicidad
Idiomas disponibles
Idiomas disponibles
•
Do not shake violently or drop wrench.
•
Do not use this wrench as a hammer.
•
Do not leave this wrench in any place exposed to excessive
heat, humidity, or direct sunlight.
•
Do not use this apparatus in water, as it is not waterproof.
•
If the wrench gets wet, wipe it with a dry towel as soon as
possible. The salt in seawater can be especially damaging.
•
Do not use organic solvents, such as alcohol or paint thinner
when cleaning the wrench.
•
Keep this wrench away from magnets.
•
Do not expose this wrench to dust or sand as this could cause
serious damage.
•
Do not apply excessive force to the LCD panel.
•
Apply torque slowly and grasp the center of the handle. Do not
apply load to the end of the handle.
•
After use, set torque wrench to lowest setting to prevent
damage to the spring.
•
Adjust the torque wrench in a horizontal direction in an
attempt to minimize the gravity interference.
•
Do not drop this wrench. If dropped, please calibrate it.
CAUTION:
•
Hard impacts or dropping the wrench may impair accuracy of
the wrench. If the wrench is dropped or receives a sharp impact
have the wrench accuracy checked.
•
To ensure correct operation and accuracy this product must be
calibrated periodically in line with standards.
Residual Risks
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual risks
cannot be avoided. These are:
•
Impairment of hearing.
•
Risk of personal injury due to flying particles.
•
Risk of burns due to accessories becoming hot
during operation.
•
Risk of personal injury due to prolonged use.
SAVE THESE INSTRUCTIONS
Battery Maintenance
•
When the wrench will not be used for an extended period of
time, remove the batteries
•
Do not mix battery types or combine used batteries with
fresh ones.
•
Sweat, oil, and water can prevent a battery's terminal from
making electrical contact. To avoid this, wipe both terminals
before loading a battery.
•
Dispose of batteries in a designated disposal area. Do not
dispose of batteries in fire.
Additional Safety Warnings
a ) Do not use a battery pack or appliance that is
damaged or modified. Damaged or modified batteries
may exhibit unpredictable behavior resulting in fire,
explosion or risk of injury.
b ) Do not expose a battery pack or appliance to fire or
excessive temperature. Exposure to fire or temperature
above 266 °F (130 °C) may cause explosion.
c ) Have servicing performed by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the product is maintained.
Residual Risks
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual risks
cannot be avoided. These are:
•
Impairment of hearing.
•
Risk of personal injury due to flying particles.
•
Risk of burns due to accessories becoming hot
during operation.
•
Risk of personal injury due to prolonged use.
SAVE THESE INSTRUCTIONS
Package Contents
The package contains:
1 Torque wrench
1 Declaration of conformance
1 Instruction manual
•
Check for damage to the tool, parts or accessories which may
have occurred during transport.
•
Take the time to thoroughly read and understand this manual
prior to operation.
Date Code Position (Fig. A)
The date code
12
, which also includes the year of manufacture,
is printed into the housing.
Example:
A 12 3456
Year, Month of manufacture and production number.
Description (Fig. A)
WARNING: Never modify the tool. Damage or personal
injury could result.
Reversible ratchet head
1
Forward/reverse dial
2
Square drive
3
Anti-slip handle
4
5
Torque adjustment collar
LCD
6
Set button
7
Battery cover
8
Intended Use
This manually operated torque wrench is used to apply a specific
torque value to a fastener, such as a nut or bolt.
This torque wrench is not intended to loosen fasteners.
This manually operated torque wrench is a professional
hand tool.
DO NOT use under wet conditions or in the presence of
flammable liquids or gases.
ENGLISH
17
Publicidad
