bora CIW 1 Instrucciones De Montaje Y De Uso página 30

Installation
Flush installation
For the flush installation of the induction
glass ceramic
dimension must be increased to 7 mm!
The distance between the cut-out edge and the
rear and side walls must be minimum 50 mm.
■ For technical reasons it is recommended to
keep a distance of at least 250 mm when
installing next to a wall unit.
The side of the wall unit must be clad with a
heat-resistant material.
30
wok CIW 1, the seam
Cutout dimensions for the installation of hobs
and/or hobs and the BORA hob extractor next to
each other:
Between all build-in appliances, spacing of
1 mm is intended.
Follow the installation
page 32!
g
Worktop cut-out
A
1 344 320
685 661
2
3 1026 1002
776 752
2 1
3 2 1208 1184
4 2 1549 1525
instructions
B
on