Haier HAMTSJ86TFTCF/1 Manual De Instrucciones página 10

5. If the ferromagnetic part covers only partially the base of the pan, only the
ferromagnetic area will heat up, the rest of the base may not heat up a sufficient
temperature for cooking.
6. If the ferromagnetic area is not homogeneous, but presents others material such as
aluminum this may affect the heating up and the pan detection.
If the base of the pan is similar to the pictures below the pan could be not detected.
Cooking zone
1 & 2
3
4
Flexing zone
The above may vary according to the size of the pan and the material it is made from.
3.3 How to use
3.3.1 Start cooking
Touch the ON/OFF control for three seconds. After power on,
the buzzer beeps once, touch screen will power on and the
induction hob will enter the state of standby mode.
The base diameter of induction cookware
Minimum
100
190
80
100
10
Maximum
220
280
140
220*400