Oase Bitron Eco 120 W Instrucciones De Uso página 31

Control system overview
1 Operating
mode
2 Button
3 UVC lamp sta-
tus display
4 Display
Four operating modes for irradiation of algae and germs as required (→ Selecting the
operating mode)
 LEDs indicate the selected operating mode.
 LED is lit blue: UVC lamps are switched on.
 LED is lit green: UVC lamps are switched off.
Functions
 Switch on / switch off the unit(→ Switching ON/OFF)
 Selecting the operating mode (→ Selecting the operating mode)
 Checking the remaining operating life of the UVC lamps (→ Resetting the operating
hour counter)
 Resetting the operating hour counter (→ Resetting the operating hour counter)
LED bar for indicating the remaining operating life:
 Four LEDs lit: 9001 ... 12000 hours
 Three LEDs lit: 6001 ... 9000 hours
 Two LEDs lit: 3001 ... 6000 hours
 One LED lit: 1 ... 3000 hours
 One LED flashing: Replace UVC lamps.
 All LEDs unlit: At least one UVC lamp is defective.
Display of the operating status:
 Display of the current water temperature in °C
 Display of (→ System messages) System messages
 Display of the residual operating life of the UVC lamps (→ Resetting the operating
hour counter)
EN
BTN0007
31