Oase Bitron Eco 120 W Instrucciones De Uso página 37

EN
BTN0017
BioTec ScreenMatic
 Please adhere to the instructions for use of the flow-through filter.
With bypass
 The bypass membrane is fitted on delivery and is located in the outlet opposite the inlet.
How to proceed:
1. Insert the outlets with flat seals through the holes in the container wall into the distributor.
2. Screw the distributor nuts with O rings onto the outlets and hand tighten.
3. Connect the Bitron to the filter pump. (→ Connecting the inlet)
BTN0005
37