Oase Bitron Eco 120 W Instrucciones De Uso página 34

Connecting the inlet
Use hoses that are suitable for a pressure of at least 1 bar.
Recommended combinations for using the hose sleeves:
Inlet
50 mm (2 in)
38 mm (1½ in)
38 mm (1½ in)
50 mm (2 in)
How to proceed:
1. Push the inlet nozzle into the inlet.
– The inlet nozzle is only necessary for a flow rate < 10000 l/h to ensure unimpaired rotation
of the cleaning rotor.
2. Screw the hose connector with union nut and seal onto the inlet.
3. Slip the hose clip over the hose, fit the hose onto the hose connector and secure with the
hose clip.
34
Outlet 1
50 mm (2 in)
38 mm (1½ in)
38 mm (1½ in)
38 mm (1½ in)
Outlet 2
(opposite the inlet)
closed
closed
38 mm (1½ in)
38 mm (1½ in)
Required accessories
–
–
For outlet 2 , a 38 mm (1½ in)
hose sleeve with a 38 mm (1½ in)
union nut
BTN0004