Publicidad
Idiomas disponibles
Idiomas disponibles
Set the numbers of CUP to the amount of
water in the water tank. The number of CUPs
is shown in the display. (Fig. 5)
EN
2.1 USING COFFEE BEANS
When the bean container is completely full,
which will be used within a few days.
Note: To ensure the grinder functions perfectly,
Fold over the seamed edges of a Melitta®
basket. (Fig. 3)
locked.
Note:Never adjust the grind level dial if the
machine is off or idle.Never forcibly turn the grind
level dial as it could damage the grinder.
Select the grind level only when the grinder is
actively grinding.
character. If a coarser setting is selected the
Press
button (O) to start the setting.
Set the number of cup (from 2 to 10 cups) by
pressing
button (L). If you do not select
the cup size, the default number of cup is 10
cups. (Fig. 5)
Note: Ensure that the selected number of cups
corresponds to the amount of water in the water
water in the water tank is depleted. If the number
of cups and the amount of water do not corre-
spond to each other, then this can lead to you not
for mild, two beans
for medium and three
beans
for strong. If you do not select
bean is
(Fig.6)
6
P22051-2-Wabilogic_AromaFreshPlus_3L_220630.indd 6-7
By pressing
button (O), the display will
the appliance starts grinding. After grinding,
the appliance starts brewing automatically.
(Fig.7)
After the coffee brewing completed, it has 3
beep sound and the icon
stays on.
The hotplate will keep the coffee warm and
will turn off automatically after 2 hours.
Then icon
disappears.
any time by pressing again
button (O).
2.2 USING GROUND COFFEE
Fold over the seamed edges of a Melitta
®
1x4
basket. (Fig. 3)
(Recommend 1 scoop per cup.)
locked.
Press
button (O) to start the setting.
button (M) and the white
LED will turn on. (Fig.8)
for mild, two beans
for medium and three
beans
for strong. If you do not select
bean is
(Fig.6)
By pressing
button (O), the display will
appliance starts brewing automatically. (Fig.7)
After the coffee brewing completed, it has 3
beep sound and the icon
stays on.
The hotplate will keep the coffee warm and
will turn off automatically after 2 hours.
Then icon
disappears.
is
any time by pressing again
button (O).
during the brewing. However, carafe needs to be
placed back to the appliance not longer than 20
CAUTION: BEWARE OF THE HOT STEAM
FROM THE STEAM VENT. (Fig. 12)
3. CLOCK AND TIMER FEATURE
SETTING THE CLOCK
Set the clock by pressing either
or
button (Q) repeatedly until the desired
time is reached. Or hold the icons down to
Press and hold
button (P) and
(Q) for 6 seconds, the clock will change to
12-hour format. The upper dot of the clock
will flash at AM mode. The lower dot of the
clock will flash at PM mode.
SETTING THE TIMER
automatically at the time you set.
®
Prepare the appliance as described in Section
2 'COFFEE PREPARATION' without starting
Set the desired start time by pressing and
holding
(Fig.10)
Set the hour by pressing button
set the minute by pressing
repeatedly. Or hold the icons down to scroll
Press
button (R) again, the icon
show on the display. (Fig.11)
After a while, the display will show the current
time.
The appliance will automatically start to make
is
By pressing
button (R), the icon
If you want to change the timer feature, follow
the above steps by pressing and holding the
can start to set a new brewing time.
Note: The programmed start time is saved until a
new start time is set or the appliance is being
removed or unplugged from the power source.
4. CLEANING AND MAINTENANCE
EXTERNAL CLEANING
Before cleaning always remove the plug from
the socket.
Never immerse appliance or cord in water.
The housing and the bean container can be
cleaned with a soft damp cloth.
dishwasher safe.
When it is cold, the hotplate can be cleaned
with a soft damp cloth.
BEAN C
ONTAINER
oil deposit.
Never wash under running water.
Note: When using oily roasts, it is important
button (P)
to take extra care to clean the bean container.
(Fig.9)
container and cause the beans to have trouble
feeding. If oily beans are used more consistently
button
with your appliance, then the bean container will
cleaning the bean container regularly.
GROUND COFFEE CHUTE
•
Holding the appliance in both hands carefully
and lay it on its back.
•
Now you can clean the area above the swivel
filter with a brush and a damp cloth.
•
To open the ground coffee chute, press the
ground coffee selection
hold for 6 seconds. The three beans
icon on the display will flash. (Fig. 13)
•
The ground coffee chute cover opens and the
(P) and
chute can be cleaned with a brush (Fig. 14).
•
To close the ground coffee chute, press
button (Q)
button (O).
•
The three beans
icon on the display
disappears.
will
•
Put the swivel filter back in place and stand
the appliance up again.
•
The ground coffee chute will keep opened
and the three beans
will keep flashing until you press
(O).
will go
• If you unplug the appliance from the wall outlet
and insert the plug again, the ground coffee
chute will close too.
DESCALING
The mineral content of the tap water in your area
recommend cleaning it periodically.
The appliance is equipped with DESCALING alert
feature. When "dCAL" appears on the display
intermittently, it reminds you that the appliance
needs to be descaled. (Fig. 15)
Follow the manufacturer instructions
regarding amounts and pour the descaling
agent into the water tank. We recommend
using Melitta
®
Anti Calc Filter Café Machines
with clean water. Please do not exceed the
EN
button (M) and
icon on the display
button
7
7/7/2022 2:08 PM
Publicidad
