Publicidad
Idiomas disponibles
Idiomas disponibles
GB
MT
Other symbols on the cutting disc:
Do not use for wet grinding
Do not use defective discs
Do not use for side grinding
Intended for working on metal
Wear ear protection
Wear breathing protection
Risk of cuts! Wear cut-resistant gloves.
Wear safety shoes
Other symbols on the guard cover:
Do not use the guard cover without
attachment for cut-off grinding!
Other symbols on the tool:
A
+
=
ON
switch (12) twice in succession
B
+
=
ON
A
+
=
ON
B
+
=
ON
on/off switch (12) pressed down
Symbols used in the instructions:
Hazard symbols with in-
formation on prevention of
personal injury and property
damage
Precaution symbol with information
on prevention of harm / damage.
34
Switching on: Press the
switch lock, on/off
Switching on: Press the
switch lock, keep the
Notice symbol with information on
how to handle the device properly.
General Safety Directions
for Power Tools
WARNING! Read all safety
notices, instructions, illustra-
tions and technical data that
have been provided with this
power tool. Omissions in the
compliance with safety directions
and instructions can cause electrical
shock, fire and/or severe injuries.
Retain all safety directions and in-
structions for future use.
The term „power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
1) Work area safety
a) Keep work area clean and well
lit. Cluttered or dark areas invite ac-
cidents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
2) Electrical safety
a) Power tool plugs must match
the outlet. Never modify the
plug in any way. Do not use
Publicidad
