Parkside Performance PWSAP 20-Li E6 Traduccion Del Manual De Instrucciones Originale página 43

­ Wear­protective­goggles:­wires­
may­become­released!
Suitable­for­rough­rust­removal,­cleaning­
weld­seams­and­removing­paint.
Press the wire brush with medium force
onto the workpiece to be processed.
Do­not­exert­excessive­strain­on­the­wire­
brush by pressing down too hard.
Cutting disc
never use a scrubbing
wheel for cutting !
­ Do­not­use­the­guard­cover­(4)­
without­attachment­(15)­for­cut-off­
grinding!
Fit­the­guard­cover­(4)­and­the­attachment­
(15)­for­cut-off­grinding,­see­"Fitting/
adjusting/removing­the­guard­cover"­and­
"Fitting­the­attachment­to/removing­the­
attachment­from­the­guard­cover".
Only­certified,­fibre-reinforced­cutting­or­
grinding discs may be used.
In­general,­work­with­small­scrubs.­Exert­
only moderate pressure on the workpiece.
Always­work­in­the­counter-direction.­This­
ensures­that­the­device­is­not­pushed­out­of­
the cut through lack of control.
Chuck key storage
The­chuck­key­(13)­can­be­stowed­in­the­
handle­(2),­see­the­detailed­illustration­on­
the­overview­image.
Removing the chuck key
•­ ­ P ull­the­chuck­key­(13)­out­of­the­grip­
(2)­by­the­protruding­handle­(14).
Stowing away the chuck key
1.­ Push­the­chuck­key­(13)­into­the­guide­
in­the­handle­(2).
2.­ Push­the­chuck­key­(13)­into­the­handle­
(2)­until­it­locks­into­place.
Assembly
Caution!
Risk of injury!
-­ Ensure­that­you­have­sufficient­space­
in which to work, and that you do not
endanger other people.
-­ All­hoods­and­protective­devices­must­
be assembled properly before commis-
sioning.
-­ Remove­the­rechargeable­battery­from­
the­device­before­changing­settings­on­
the­device.
Mount handgrip
The device must only be
operated with the handgrip
mounted.
Screw­the­handle­(2)­tight­on­to­the­thread­
for­the­handle.­On­the­device,­select­the­
left,­right­or­top­thread­for­the­handle­(6),­
depending on how you work.
Assemble/set protective
hood/demounting
Adjust­the­protective­hood­such­that­any­
sparks or detached parts cannot hit either
the user or any bystanders.
The­protective­hood­must­also­be­positi-
oned such that the sparks cannot ignite
combustible parts, including those in the
surroundings.
GB MT
43