Parkside Performance PWSAP 20-Li E6 Traduccion Del Manual De Instrucciones Originale página 52

GB MT
Troubleshooting
­ Remove­the­battery­from­the­device­before­carrying­out­any­maintenance,­
adjustment­or­cleaning­work­on­the­device.­Danger­of­electric­shock!
Problems
Device­doesn't­start
Grinding tool does
not­move­although­
the engine is run-
ning
Engine­is­slower­
and stops
Grinding disc does
not rotate smoothly,
abnormal noises
can be heard
Tool­does­not­con-
nect to the Parkside
App
Display­(9)­flashing
52
Possible Cause
Battery­(17)­discharged
Battery­(17)­not­inserted
On/off­switch­(12)­may­be­
defective
Switch­lock­(10)­defective
Engine­faulty
Quick-change­nut­(20)­loose
Workpiece, remaining workpie-
ces or remaining grinding tools
block­drive
Device­is­overloaded­through­
workpiece
Quick-change­nut­(20)­loose
Grinding­disc­is­defective
No Smart Performance battery
used
Wheel blocked
Battery­(17)­discharged
Error correction
Charge the battery
Insert­battery­(see­'Operation')
Repair by Customer Care
Tighten­grinding­disc­nut­(see­
„Installing/changing­disc")
Switch­off­the­tool­and­remove­
the­battery­(17),­then­remove­the­
blockages
Reduce pressure on grinding tool
Workpiece unsuitable
Tighten­grinding­disc­nut­(see­
„Installing/changing­disc")
Change grinding disc
Use Smart Performance battery
(e.g.­Smart­PAPS­204­A1)
Switch off the tool, unblock,
restart the tool
Charge the battery