8.2. Assembling the lance to the trigger valve
Fit the lance into the trigger valve and thread enough so that there is no leakage,
as shown in the image below:
WARNING!
Do not overtighten the screw cap.
8.3. Assembling the hose to the sprayer
• Fit the hose through the S-20 nut, attach it to the connector and thread it.
• Plug the connector into the quick coupler and press until it clicks.
9. Operating Instructions
The following steps describe how to safely use the sprayer.
9.1. Choosing nozzle type
Our sprayers are compatible with all ISO certifi ed nozzles or hydraulic tips. Each
nozzle off ers a range of options and specifi cations for product application, so it
is extremely important to know how to choose the right nozzle for your equip-
ment. See the table below to identify which nozzle is best suited for fl ow rate and
droplet size
NOTE: The following nozzles are optional, so they do not accompany this sprayer.
8/55
Nozzle
Identifi cation (code)
type
JEF 8001 orange (1197534)
JEF 80015 green (1197535)
JEF 8002 yellow (1197536)
JSF 11001 orange (1197473)
JSF 110015 green (1197475)
JSF 11002 yellow (1197476)
JHC 80015 green (1197555)
JHC 8002 yellow (1197565)
JHC 8003 blue (1197571)
JDF 02 yellow (1197483)
JDF 03 blue (1197485)
JDF 03 red (1197486)
AirMix 110015 green (255091)
AirMix 11002 yellow (255109)
AirMix 110025 lilac (255177)
DROPLET SIZE
VF
Very Thin
F
Thin
M
Medium
C
Course
VC
Very course
XC
Extremely course
WARNING!
Use PPE to service and replace parts.
1.0 bar (15 psi)*
Use: mainly systemic herbicides
Code: 1197164
Use: mainly systemic and contact herbicides
Code: 1197159
Use: systemic and contact products
Code: 1197163
Use: mainly contact insecticides and fungicides
Code: 1197162
Replace any nozzle that has a fl ow rate higher than 10% of nominal fl ow rate.
Jacto recommends the use of the ECOVALVE pressure regulating valve accessory
that favors a more homogeneous application.
Droplet size
Pressure
(psi)
(vmd )
(l/min)
45
VF
45
VF
45
VF
30
F
30
F
30
F
60
F
60
F
60
F
30
M
30
M
30
M
20
C
20
C
20
C
1.5 bar (22,5 psi)*
2.0 bar (30 psi)*
3.0 bar (45 psi)*
Flow
rate
0,40
0,60
0,80
0,33
0,49
0,65
0,69
0,92
1,36
0,65
0,98
1,31
0,41
0,54
0,68