Publicidad
Idiomas disponibles
Idiomas disponibles
After cleaning, perform the above-mentioned operations in reverse steps to restore the components to
their original positions.
The light used in oven is a special high temperature resistant light
(AC220V/25W).
Therefore, it is necessary to purchase genuine light from authorized
distributors.
The replacement steps are as follows:
1.Disconnect the power supply of the power socket.
2.Turn the glass cover counterclockwise.(Figure 5)
3.Remove the light and replace it with the same type.(Figure 6)
4.After replacing the light, screw the glass cover clockwise.
The probe used in the oven is a mechanical physical probe. Do not replace it without authorization. In case
of abnormal
temperature sensing of the sensor probe, please contact the designated repair shop immediately for
replacement.
Oven Light Replacement
Sensor Probe Replacement
37
Publicidad
