Publicidad
Idiomas disponibles
Idiomas disponibles
Model
Voltage
Rated power
Upper Outer Ring Heat Pipe
Upper inner heating pipe
Lower heating tube
Rated frequency
Product size(width * depth * height)
Rated volume
Installation Instructions
The kitchen cover must be suitable to ensure that the oven works properly.
●
The panel of kitchen equipment adjacent to the oven must be made of heat-resistant materials. Kitchen
●
equipment made of plywood shall ensure that the glue can withstand a temperature of at least 120 degrees
Celsius. When plastic or glue cannot withstand this temperature, the equipment will melt and deform.
Once the oven is placed in the kitchen equipment, the electrical components must be completely insulated.
●
This is a
statutory safety requirement.
All furnace covers must be firmly fixed in place and cannot be removed without using special tools.
●
Remove the back of the kitchen equipment to ensure the full circulation of air around the oven.
●
The oven rack must have at least 45 mm rear clearance.
●
Because oven handle and sheet metal parts are easy to cut, installers need to wear gloves for installation.
●
595(width）X565(depth）X595(height)
Specifications
Important note
AM7504XXX-B series
220-240V
2200W
1000W
1200W
1000W
50/60Hz
75L
For installation personnel
38
Publicidad
