Hitachi 32HAE2252 Manual De Instrucciones página 13

Remote Control
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Inserting the Batteries into the Remote
Remove the screw that secures the battery compart-
ment cover on the back side of the remote control first.
Lift the cover gently. Insert two 1.5V - size AAA bat-
teries. Make sure the (+) and (-) signs match (observe
correct polarity). Do not mix old and new batteries.
Replace only with same or equivalent type. Place the
cover back on. Then screw the cover back on again.
To pair remote with the TV
When TV is turned on for the first time, a search for
accessories will be performed before the initial setup
starts. You will need to pair your remote control with
your TV at this point.
Press and hold the Source button on the remote for
about 5 seconds, the LED on the remote will light up.
Then release the Source button, the LED will start
to blink. That means the remote is in pairing mode.
Now you will wait the TV to find your remote. Select the
name of your remote and press OK when it appears
on the TV screen.
When the pairing process was successful, the LED
on the remote will go off. If the pairing process fails
the remote will enter to sleep mode after 30 seconds.
1. Standby: Quick Standby / Standby / On
2. Numeric buttons: Switches the channel in Live TV
mode, enters a number or a letter in the text box on
the screen
3. Language: Switches among sound modes (analogue
TV), displays and changes audio language (digital TV,
where available)
4. Volume +/-
26
5. Microphone: Activates the microphone on the remote
25
6. Home: Opens the Home Screen
24
7. Guide: Displays the electronic programme guide in
Live TV mode
8. OK: Confirms selections, enters sub-menus, views
channel list (in Live TV mode)
9. Back/Return: Returns to previous menu screen, goes
23
one step back, closes open windows, closes teletext (in
22
Live TV-Teletext mode)
21
10. Netflix: Launches the Netflix application
11. Menu: Displays Live TV Settings menu in Live TV mode
20
12. Coloured Buttons: Follow the on-screen instructions for
19
coloured button functions
13. Rewind: Moves frames backwards in media such as
18
movies
17
14. Stop: Stops the media being played
16
15. Record: Records programmes in Live TV mode
16. Pause: Pauses the media being played, starts timeshift
recording in Live TV mode
Play: Starts to play selected media
17. Text: Opens and closes teletext (where available in
Live TV mode)
18. Fast forward: Moves frames forward in media such
as movies
19. Source: Shows all available broadcast and content
sources in Live TV mode
20. YouTube: Launches the YouTube application
21. Exit: Closes and exits from displayed Live TV Settings
menus, closes the Home Screen
22. Directional buttons: Navigates menus, setting options,
moves the focus or cursor etc., sets record time and
displays the subpages in Live TV-Teletext mode when
pressed Right or Left. Follow the on-screen instructions.
23. Info: Displays information about on-screen content
24. Programme +/-: Increases/Decreases channel number
in Live TV mode
25. Mute: Completely turns off the volume of the TV
26. Subtitles: Turns subtitles on and off (where available)
Standby Button
Press and hold the Standby button on the remote
control. Power off dialogue will appear on the screen.
Highlight OK and press the OK button. The TV will
switch into standby mode. Press briefly and release
to switch the TV into quick standby mode or to switch
on the TV when in quick standby or standby mode.
English - 11 -