Publicidad
Idiomas disponibles
Idiomas disponibles
Check behind
access door
5. Turn cleaner OFF and disconnect from electrical outlet. Remove
access door (A); check for blockage. Replace access door.
Check airflow
path
6. Remove hose from wand.
7. Plug cleaner in and turn ON. Check for suction at end of hose. If
,there is suction, continue with step 9. If there is no suction, check for
blockage in hose. Clear blockage.
8. Turn cleaner OFF and disconnect
from electrical
outlet.
9. Lower handle to floor. Remove 2 screws, one on each side of the
t hose. Check for blockage in hose. Clear blockage.
Check wand
10. Turn cleaner OFF and disconnect
from electrical outlet.
11. Remove wand from cleaner. Check for blockage. Clear blockage.
Publicidad
