DO NOT USE CLEANER OUTDOORS
OR ON DAMP OR WET
SURFACES,
Electrical
cord
i Open the tool/c:ord storage compartment (A), located on the side
of the cleaner and remove the cord. The top cord hook swivels for
quick cord release.
ON/OFF
and control
panel
The DigiToucW s_control panel (B) is located at the handle base.
Open tool/cord storage compartment
to remove cord and plug
cord into electrical
outlet. Close storage door.
To turn cleaner ON, press (_
once.
To turn cleaner OFF, press Q
again.
The control panel allows you to choose a cleaning mode for carpet
height or hard surface floors.
For best cleaning results, select the LOW setting. If the cleaner is difficult
to push, select a higher setting.
Select the type of carpet to be cleaned:
HIGH for deep pile carpet,
MED for medium
pile,
LOW for low pile, level loop, kitchen type, and other similar types,
HARD SURFACEfor bare floors. The agitator is OFF; the nozzle is set at
LOW.
Automatic
agitator shutoff
The agitator will turn off when the handle is in the upright, storage posi-
tion in either the upright cleaner or canister cleaner (folded) positions.