FITFIU FITNESS MUG40010 Manual Del Usuario página 34

5. Draw the Cable (66) downwards between the two Guiding Tube (5) and fully thread the bolt on the end of the
Cable (66) into the top opening on the Select Bar (12).
6. Attach the Lat Bar (13) to the front end of the Cable (66), connect by X1 Hook (61).
STEP 7
1. Attach one end of the Cable for Butterfly Arm
(64) to the hook on the Right Butterfly Arm
(10R), tighten by X1 Hex Head Bolt (22), X1 Flat
Washer (33) and X1 Nylon Nut (37).
2. Draw the Cable (64) around the Pulley (48) then
attach the Pulley (48) to the Pulley Bracket A
(17) on right side of the Upright Support Tube
(2), tighten by X1 Hex Head Bolt (26) and X1
Nylon Nut (38).
3. Draw the Cable (64) downward and around the
Pulley (48), attach the Pulley (48) to the upper part
of Two Way Bracket for Pulley (21) and tighten by
X1 Hex Head Bolt (26) and X1 Nylon Nut (38).
4. Draw the Cable (64) upward and around Pulley
(48). Attach Pulley (48) to the Pulley Bracket
(17) on the left side of the upright Support Tube
(2), tighten by X1 Hex Head Bolt (26) and X1
Nylon Nut (38).
5. Attach the other end of Cable (64) to the hook
on the Left Butterfly Arm (10L), tighten by X1
Hex Head Bolt (22), X1 Flat Washer (33) and X1
Nylon Nut (37).
34