Citizen CT-S251 Manual De Usuario página 23

Ocultar thumbs Ver también para CT-S251:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

CAUTION
Before configuring the top margin suppression setting, first remove any partially cut paper from
the printer. Failure to do so can cause the cut paper to be torn off by the next print operation,
which can cause printer trouble.
 Auto side shift (MSW8-6)
This function dissipates heat load during frequent heat generation by a vertical
ruled line or other specific head heating element.
If no data is received within 15 seconds after each cut or print, the print position is
automatically slid N* dots to the right. The original print position is returned to at the
next slide timing.
* N is the MSW8-6 setting value.
CAUTION
 If the right margin is too narrow, this may result in some print characters being cut off.
 This function is disabled under initial settings.
 To enable this function, use MSW8-6 to specify an appropriate value for the maximum slide
amount.
23

Publicidad

Tabla de contenido
loading

Tabla de contenido