70mai A200 Serie Manual Del Usuario página 5

3. Installing the memory card
Insert the memory card into the
slot.
4. Mounting the dash cam
Paste the dash cam onto the
electrostatic sticker.
5. Routing cable
Route the power cord to the
vehicle's power outlet and connect
to power.
Start the car engine, and the dash
cam will automatically turn on.
Note: Depending on the vehicle, the power outlet may be
located in a different position. The provided figure is for
reference only.
6. Adjusting the camera angle
Adjust the camera angle based on
the image presented on the main
screen when dash cam is turned on.
Accessories (optional)
The rear recording function of this product
needs to be used with a rear camera. Scan
the QR code to obtain the user guide for
the rear camera.
Note: To avoid the rear camera malfunction due to device
incompatibility, it is recommended to use a rear camera from
the 70mai brand.
03