Connecting - PIONEER DJ DDJ-1000SRT Manual De Instrucciones

Connecting

1 Connect headphones to one of the [PHONES] output
terminals.
2 Connect powered speakers, a power amplifier, devices
etc. to the [MASTER 1] or [MASTER 2] output terminals.
! To output the sound from the [BOOTH] output terminals,
connect speakers or other devices to the [BOOTH] output
terminals.
! For details on connecting the input/output terminals, see the
"Operating Instructions."
3 Connect the unit to your PC/Mac via a USB cable.
4 Turn on your PC/Mac.
5 Connect the AC adapter.
6 Press the [] switch on this unit's rear panel to turn the
unit on.
! For Windows users
The preparing device message may appear when this unit is
first connected to a different USB port on the PC. Wait until the
ready-to-use message appears.
7 Turn on the devices connected to the output terminals
(powered speakers, power amplifier etc.).
! When a microphone, DJ player or other external device is
connected to input terminals, turn on that device too.
13
En