Publicidad
Idiomas disponibles
Idiomas disponibles
Innermost
1
glass
3
Third inner
glass
Plastic
5
glass slot-
Lower
3. As shown in the figure, gently lift the in-
nermost glass towards "A" and then, re-
move it by pulling towards "B".
4. Repeat the same process for removing
the second and third glasses.
The first step of regrouping the door is to
replace the second and third glasses (2, 3).
As shown in the figure, place the bevelled
edge of the glass to meet the bevelled edge
of the plastic slot.
The attachment order of the second and
Second in-
2
ner glass
third inner glasses is not important, as they
4
Outer glass
are interchangeable.
While attaching the innermost glass (1),
pay attention to place the printed side of
the glass on the second inner glass. It is
crucial to place the lower corners of all in-
ner glasses to meet the lower plastic slots
(5). Push the plastic component towards
the frame until a "click" sound is heard.
7.9 Cleaning the Oven Lamp
In the event that the glass door of the oven
lamp in the cooking area becomes dirty;
clean using dishwashing detergent, warm
water and a soft cloth or sponge and dry
with a dry cloth. In case of oven lamp fail-
ure, you can replace the oven lamp by fol-
lowing the sections that follow.
Replacing the oven lamp
General Warnings
• To avoid the risk of electric shock before
replacing the oven lamp, disconnect the
product and wait for the oven to cool. Hot
surfaces may cause burns!
• This oven is powered by an incandescent
lamp with less than 40 W, less than 60
mm in height, less than 30 mm in dia-
meter, or a halogen lamp with G9 sockets
EN / 37
After cleaning, all glasses must be
reassembled.
EN
ES
Publicidad
