Publicidad
Idiomas disponibles
Idiomas disponibles
Important customer information
Please note that returns within or outside
the warranty period should always be in the
original packaging. This measure effectively
avoids unnecessary transport damage and
any associated disputes. Your equipment is
optimally protected only in the original box
and this will ensure smooth processing.
Service
Do you have a technical question? A complaint?
Do you need spare parts or operating instruc-
tions? We can help you quickly and easily in the
Service section of the homepage of Güde GmbH
& Co. KG (www.guede.com). Please help us to
help you. In order to be able to identify your
machine in the event of a complaint, we need
Inspection and maintenance schedule
General
Before starting each
job
After each job
Storage
Entire saw
Plastic body
Saw chain
Saw guide bar
Sprocket
Chain brake
Check proper functioning regularly. (Chain must not move
Clutch
Saw chain
Saw guide bar
Chain lubrication
Chain brake
Deceleration brake
On-off switch
Oil tank cap
Saw guide bar
Guide bar mount
Dismantle, clean and lightly oil. Clean the guide groove of
Chain oil tank
Saw chain / saw guide
bar
Entire saw
the serial number, the item number and year of
manufacture. All this data can be found on the
rating plate.
Tel.:
+49 (0) 79 04 / 700-360
Fax:
+49 (0) 79 04 / 700-51999
Email:
support@ts.guede.com
Disposal
When the machine is finally taken out of service
at the end of its service life, please dispose of
it in an environmentally friendly manner at a
recycling centre or dismantle the machine into
its metal and plastic components and dispose
of them in accordance with the material. Follow
local recycling requirements and applicable
regulations. Dispose of all chemicals, e.g. engine
oil or fuel, at a service workshop or at a suitable
waste disposal point.
Regularly clean the exterior.
Have them checked regularly by a specialist workshop.
Check for breaks and cracks.
Re-sharpen regularly.
Clean regularly.
Check proper functioning regularly.
when idling).
Check for damage and sharpness.
Check chain tension.
Function test.
Check for leaks.
If there is any damage, arrange for repair in a specialist
workshop.
Clean oil inlet bore.
Clean, especially the oil guide groove.
Empty.
the saw guide bar and attach the scabbard.
Store cleaned and serviced saws safely in a dry room out
of the reach of children.
After prolonged storage, have the saw checked in a spe-
cialist workshop (residual oil can become waxy and clog
the oil pump valve)
ENGLISH
39
Publicidad
