Publicidad
Idiomas disponibles
Idiomas disponibles
60
ASSEMBLY
ATTENTION: This product requires assembly before use. Due to the weight and / or size of the
log splitter, it is recommended that another adult be present to assist with the assembly. Inspect
all components closely upon receipt to make sure that no components are missing or damaged.
ATTENTION: Please read and follow all instructions for assembly and operation. Failure to properly
assemble this equipment could result in serious injury to the user or bystanders, or cause damage to
the equipment.
Place the shipping box on a solid flat surface and carefully remove the lid. This operation must be carried out by two
people. Take all parts out from the shipping box and inspect the components to make sure there are no missing pieces
before starting to assemble the log splitter. Once you have verified that all components are present and that they are
in perfect condition, follow steps 1 to 10.
TOOLS REQUIRED
•
Rubber or wooden hammer
•
10mm, 13mm, 16mm, 17mm, 17mm, 18mm, 19mm, 23mm wrenches
•
6mm Allen wrench
•
Large adjustable wrench
•
Phillips screwdriver
•
Pliers
STEP 1: CYLINDER COVER ASSEMBLY
1.
Remove the cylinder cover (nº21) from the beam, then place the cylinder cover (nº21) between the cylinder
(nº72) and the wedge (nº2).
2.
Pull the cylinder (nº72) back towards the beam, screw the flat washer Ø8 (nº23) and the lock washer Ø8
(nº22) with the hexagon bolt M8x20 (nº18).
21
2
1
72
23/22/18
Publicidad
