Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 6: CONNECT THE ELECTRIC MOTOR
1.
Connect the electric motor (nº47) to the wheel bracket using the hexagon bolt M8x35 (nº65), the flat
washer Ø8 (nº23), the flat washer Ø8 (nº22) and the nylon locking nut M8 (nº19).
2.
Secure the switch supply line to the beam using the M3x10 screw (nº51), the lock washer Ø3 (nº52), the flat
washer Ø3 (nº53) and the plastic clip (nº50).
51/52/53
50
STEP 7: CONNECT THE SWITCH
1.
Connect the switch (nº48) to the mounting plate using the M6x12 screw (nº55), the lock washer Ø6 (nº32)
and the flat washer Ø6 (nº33).
1
47
23/22/19
73
65
55/32/33
48
63
EN
Publicidad
