Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 2: MOUNTING THE DOUBLE HANDLE
1.
Place the connecting tube (nº44) in the control valve channel (nº46), lock it with the pin Ø5x26 (nº42) and
the cotter pin Ø2x10 (nº43), then secure it with pliers.
2.
Attach the frame (nº37) to the control valve (nº46) using the internal hexagonal screw M8x16 (nº34) and
the lock washer Ø8 (nº22).
3.
Attach the spacer plate (nº35) to the frame (nº37) using the internal hexagonal screw M8x16 (nº34) and the
lock washer Ø8 (nº22).
STEP 3: WHEEL MOUNTING
1.
Attach the wheels (nº74) to the wheel bracket (nº73) using the flat washer Ø16 (nº64), the fine nut with
hexagonal groove M16 (nº63) and the cotter pin Ø4x30 (nº75).
34
22
35
42
37
44
46
43
73
74
64 63
75
61
EN
Publicidad
