Publicidad
Idiomas disponibles
Idiomas disponibles
62
STEP 4: ATTACH THE BEAM TO THE WHEEL BRACKET
1.
Attach the beam (nº1) to the wheel support (nº73) with the hexagon bolt M10x55 (nº27), the flat washer
Ø10 (nº15), the lock washer Ø10 (nº16) and the nylon lock nut M10 (nº17).
STEP 5: ATTACH THE FRONT SUPPORT LEG AND HANDLE TO THE BEAM.
1.
Fasten the front support leg (nº12) to the beam (nº1) with the hexagon bolt M10x90 (nº14), the flat washer
Ø10 (nº15), the flat washer Ø10 (nº16) and the nylon nut M10 (nº17). Then secure the locking pin (nº13).
2.
Attach the handlebar (nº78) to the beam (nº1) using the flat washer Ø16 (nº64) and cotter pin Ø4x30 (nº75).
1
27/15/16/17
81
75
1
77
14/15/16/17
12
13
73
Publicidad
