Publicidad
Idiomas disponibles
Idiomas disponibles
64
STEP 8: CONNECT THE TUBE
1.
Connect the oil inlet pipe (nº26) to the Z 1/2" - M14*1.5 (nº60) connector.
2.
Connect the oil return pipe (nº76) to the oil return connector on the beam.
3.
Connect the oil pipe (nº62) to the gear pump using the clamp (nº61).
76
STEP 9: CONNECT THE LOG HOLDER
1.
Fasten the trunk support (nº11) to the beam using the hex bolt M10x25 (nº49) and the nylon lock nut
M10 (nº17).
58
60
62
61
11
1
26
1
11
17/49
Publicidad
